The Gigabyte FI27Q-P Frameless IPS Monitor Review

Gigabyte FI27Q P IPS Monitor Featured

When it comes to PC gaming the most important peripheral after CPU and GPU is a monitor. Good picture quality and a performance-oriented gaming monitor can definitely enhance your gaming experience by a fair margin. Today we will take a close look at Gigabyte FI27Q-P IPS Monitor which is a budget gaming monitor. We will dive into specs, features, and performance to know is it worth gaining your consideration.

Gigabyte FI27Q P IPS Monitor

Pros and Cons

PROSCONS
Premium gaming performanceCheaper rivals may offer better value
Good contrastBad black uniformity.
Great color accuracy.No Rj45 Support
165hz refresh rate.

Key Specification

Gigabyte FI27Q-P IPS Monitor
Gigabyte FI27Q P IPS Monitor
$CHECK PRICE
BrandGigabyte
Model FI27Q-P
Display TypeGaming Monitor
WebcamNo
Weight9.7 kg
ColourBlack
Dimension596.736 x 335.664 mm
Power supply100 to 240 VAC, 50 / 60 Hz

The Aorus FI27Q-P from Gigabyte offers some impressive specs for a gaming monitor, let’s find out if it’s worth it for the price in this monitor review. The IPS panel is 27 inches with a 16 by aspect ratio and runs with a 1440p resolution and matte finish. It got a 165Hz refresh rate and a 1ms response time, although that is MPRT rather than grey-to-grey. Combine with adaptive sync it’s got quite a few features for gaming.

Picture/Display

Gigabyte FI27Q-P IPS Monitor
Display TypeIPS-Type LCD
Size27 inch
TouchscreenNo
Aspect ratio16:9
Response Time1ms(MPRT)
Pixels 108 PPI
FinishMatte
Resolution2560 x 1440 Pixel
Refresh Rate165Hz

Gigabyte FI27Q P IPS Monitor Screen

When it comes to performance, the Aorus FI27Q-P is average as well, which isn’t very pretty regarding its premium price tag. Input lag is great at barely 4ms of delay, which isn’t obvious. Apart from HBR3, the FI127Q-P has something that is almost standard abilities concerning a high-end non-curved gaming screen. This got a 27-inch slanting and a 2,560 x 1,440 resolution, two characteristics that remain very strong collectively. The technology adopted remains IPS, hence you can be assured of great color accuracy, although proper contrast is only 1,000:1, more moderate than you get with VA panels, plus the pixel response is 1ms MPRT preferably than grey-to-grey.

RELATED:  Compare: Gigabyte G34WQC 34 Ultrawide vs Cooler Master GM34-CW 34 Curved

It’s deserving remarking that the standard highest illumination remains only 350cd/m2 as well, which isn’t still suitable for the basic DisplayHDR 400 standard, dampening the importance of HBR3 a limited. Though the 165Hz refresh is allied with FreeSync 2 and G-sync Cooperative status, that indicates that the aforementioned monitor doesn’t get the NVIDIA G-sync tools bounded but still, it has been accredited as acting. Gigabyte additionally claims 95 per cent of the DCI-P3 color scope.

Connectivity

Gigabyte FI27Q-P IPS Monitor
HDMI2.0 x 2
DisplayPort1.4 x 1
Earphone jackYes 3.5mm
USB3.1 x 2
RJ45No
Built-in SpeakersNo
G-SYNC SupportYes
FreeSync SupportYes

To run the monitor at 1440p 165Hz you’ll need to use DisplayPort. The HDMI is limited to 144Hz, which makes sense as this is a limitation of the HDMI 2.0b specification. The Nvidia RTX 2080 TI would work with G-Sync compatible mode with DisplayPort but not HDMI. RX 5700 XT on the other hand worked with FreeSync with either DisplayPort or HDMI, but you might as well stick to DisplayPort to get the full 165Hz refresh rate. With DisplayPort in use, the FreeSync range was reported as 48Hz to 165Hz, and as it’s got FreeSync premium it’s also got low frame rate compensation.

It also comes with a 3.5mm headphone and mic jacks with active noise cancellation, two HDMI 2.0 inputs, full-size DisplayPort 1.4, and a USB Type-B port which is used to connect the monitor to your PC, and this allows you to use the other two USB Type-A ports as a USB hub.

RELATED:  Budget Gaming: AOC 24G2 24 Frameless IPS Monitor Review

Power

Gigabyte FI27Q-P IPS Monitor
Power Consumption90 W
Power Adapter TypeInternal

From the above-mentioned table, you can get that the Gigabyte FI27Q-P IPS Monitor needed the 90W(Watts) of power consumption which is very predictable for this type of gaming monitor also it got an internal type of power adapter option which can be seen with the many monitors right now in the market.

Conclusion!

This monitor is a very good performer and the features it offers are working and make it more useful than others. Nothing is missing here, though the cost of about £460 likewise appears pretty premium while you can get other monitors in the market which are offering several of the identical abilities yet in a curved design, for £60-100 less. Hence you’re spending money for a premium HBR3. So we suggest that you should watch out for other options in the market before gets hands on this one.